User's Manual

Alarm How to Set
High
Glucose
Alarm
The High Glucose Alarm is on by default.
The alarm level is initially set to
240 mg/dL. You can use the arrows
to change this value between
120 mg/dL and 400 mg/dL. If the
alarm is on, you will be notified
when your glucose rises above the
level you set. Touch the slider to
turn the alarm off.
Touch done to save.
Signal
Loss
Alarm
If the alarm is on, you will be
notied when your Sensor has not
communicated with your Reader
for 20 minutes and you are not
receiving Low or High Glucose
Alarms. Touch the slider to turn the
alarm o.
Touch done to save.
On
?
mg/dL
240
done
High Glucose Alarm
done
On
Turn On to get notified when
the glucose alarms you set are
not available because your
Sensor is not communicating
with the Reader.
Signal Loss Alarm
Step
Action
4
Low Glucose Alarm
High Glucose Alarm
Signal Loss Alarm
Change Alarm
Settings
OK
Change Alarm Settings
Alarm Settings
Low Glucose 70 mg/dL
High Glucose 240 mg/dL
Signal Loss On
OK
When you are nished setting your alarms,
touch OK. The Alarms Settings screen now
shows your current alarm settings. Touch OK
to return to the main settings menu, or touch
Change Alarm Settings to make additional
updates.
55 56
DOC40395_rev-A_manual.indd 55-56 10/23/18 1:16 PM