User's Manual

Clinical Trial Support Line: 1-888-971-4766 - 128 -
ART05005 REV 4
Table 5.6. Status Information
Status
Information
Description
Removed
Sensor
Allows you to indicate you are removing a Sensor so Data Loss
Alarms will not be set off.
System Status Shows information about the System, including Sensor life remaining
and time since valid data was transmitted.
Receiver Status Shows information about the Receiver, including serial number and
software version (may be useful when calling Clinical Trial Support),
as well as battery life remaining.
Transmitter ID Shows the Transmitter’s serial number. You may need to verify the
serial number after linking to a new Transmitter. This unique value is
used by the Receiver to accept data from only your Transmitter. It
also shows battery life remaining.
CM Status Stores recent error codes related to the Continuous Monitoring Mode
(may be useful when calling Clinical Trial Support).
Calibration BG Allows you to add a new blood glucose reading used for calibration.
Use this selection ONLY at the request of a Clinical Trial Support
representative.
Removed Sensor
Removed Sensor is an optional feature that can be activated when you manually
remove a Sensor. Activating the Removed Sensor feature:
• Keeps the Data Loss Alarm from sounding when you remove the Sensor.
• Electronically records the time and date of Sensor removal.
To activate the Removed Sensor feature:
1. Select System from the Main Menu.
2. Select Status from the System Menu.
3. Select Removed Sensor from the Status Menu. Press the Right Option
Button to activate.