User Manual

27
28
Viewing Test Results in Memory
Meter memory stores the last 400 test results with time and date. Press
c
to scroll through the
results. The most recent result appears rst.
on the display indicates that you are viewing stored test results.
shows the average value of glucose readings from the last 7-, 14- or 30-days.
on the display indicates that the test result occurred when it was too hot or too
cold to use the meter and may not be accurate. This result is included in 7-, 14-
and 30-day averages.
a test result of under 1.1 mmol/L is included in memory as LO.
a test result of over 27.8 mmol/L is included in memory as HI.
indicates a control solution test result.
Setting Reminder Alarms (optional)
Purpose
The purpose of this section is to set up to four reminder alarms to prompt you to test throughout
the day.
Reminder Alarm
1. With the meter o, press and hold
m
for 3 seconds until appears
and 0 is ashing.
2. Press
c
. Reminder alarm 1 ashes.
Hour
Note: You are setting time for Reminder Alarm not clock time.
3. Set hour
• Press
m
to set hour
• Press
c
to display correct hour
• Press
m
to save
Minutes
4. Set minutes
• Press
c
to display correct minutes
• Press
m
to save
www.AbbottDiabetesCare.com
ART22311-101_rev-B.indd 27-28 8/28/14 11:30 AM