User's Manual

6 • Surgeon Programs
WHITESTAR SIGNATURE™ System Rx Only – Z370147 Rev. C 1108 6-8
Create a New
Program
When you create a new surgeon, that surgeon is assigned the AMO Default
Program setup. You can customize a program for that surgeon name with your
preferred settings. You can also create new programs for existing surgeons.
1. Press Configuration.
2. Press Surgeons and Programs.
3. Press Select Program.
4. Select the surgeon or program from the list.
5. Press Enter.
6. Edit the settings for this program on the Settings window. Use the Copy
Program to copy another surgeon's program. Refer to Copy a Surgeon
Program in this chapter.
7. Press Save As. The Keyboard window opens.
8. Enter the name of the program.
9. Press Enter.
10. Press Exit Settings.