User's Manual

6 • Surgeon Programs
WHITESTAR SIGNATURE™ System Rx Only – Z370147 Rev. C 1108 6-14
Program – Assign
Order
Use Program Assign Order to change the order in which the surgeon names are
shown on the Select Surgeon window.
1. Press Configuration.
2. Press Surgeons and Programs.
3. Press Database.
4. Select Program Database. A list of programs appears.
5. Select a program.
6. Use the Assign Program Order Up and Down arrows to move the Program.
The arrows are found at the bottom of the window.
Figure 6.13 – Surgeon and Program Databases
7. Repeat steps 5 and 6 until you are satisfied with the order.
8. Select Exit Settings.