User's Manual

10 • Error Messages Troubleshooting and Diagnostics

WHITESTAR SIGNATURE™ System Rx Only – Z370147 Rev. C 1108 10-3

Figure 10.1 – Fuse Location

Wireless Foot Pedal

Battery Replacement

Procedure

Four AA size NiMH batteries provide power to the wireless foot pedal. You must

replace the batteries with the same size and type (NiMH) of batteries. If incorrect

batteries are used, the wrong batteries might cause damage to the foot pedal.

To replace the batteries in the foot pedal:

1. Remove the screws on the battery cover. The battery cover is located on the

bottom of the foot pedal.

2. Remove the old batteries. Do not throw the batteries in to the garbage. Use the

proper disposal method for the batteries.

3. Insert the new batteries. Make sure that the batteries are inserted correctly.

4. Replace the battery cover and tighten all of the screws.

1. Power Switch 2. Fuse Holder