User's Manual

3 • System Setup
WHITESTAR SIGNATURE™ System Rx Only – Z370147 Rev. C 1108 3-23
Figure 3.12 – Footpedal - Advanced Control Pedal (Dual Linear)
Footpedal Operation
The footpedal has three active “PITCH” ranges, which are referred to as Positions
1, 2 and 3. Position 0 is the Off position, and Position 3 is the fully pressed position.
The ranges are shown below. The Advanced Control Pedal has two Yaw switches.
Figure 3.13 – Footpedal “Pitch” and “Yaw” Positions
The footpedal position determines the function that is delivered by the handpiece,
which depends on the mode selected on the touch screen. When the footpedal has
been connected, place your foot on the pedal and press to the desired position. The
footpedal settings and programming are addressed in Chapter 5, “Anterior Segment
Surgery Operating Modes”.
1. Pitch 2. Yaw
Toe Down/Up Toe Right/Left
Configurable Ranges Configurable Ranges