User's Manual

4 • Equipment Operation
WHITESTAR SIGNATURE™ System Rx Only – Z370147 Rev. C 1108 4-6
Select Program and
Install the
FUSION™ Tubing
Cassette
After you select a surgeon, you must select a program from the surgeon's available
programs. If this is the first time the system has been used, AMO Default Program
is the only program that appears on the screen. The first program you create uses
the AMO Default Program settings as a starting point. You can modify the
settings and Save As a specific program or surgeon name. The system does not let
you overwrite the AMO Default Program when you press SAVE.
If a surgeon only has one program set up, this screen is not shown, and the System
proceeds immediately to the tubing cassette installation screen for the type of
program that is set up for that surgeon. The System automatically recognizes the
type of tubing casette that is installed.
Note: An asterisk next to a program name indicates that the surgeon as selected
that program as their default program.
Figure 4.5 – Select Program Screen