User's Manual

4 • Equipment Operation
WHITESTAR SIGNATURE™ System Rx Only – Z370147 Rev. C 1008 4-3
Language Selection The WHITESTAR SIGNATURE™ System features a 17-language user interface.
Before you proceed, select one of the languages for your touch screen and controls.
(English is the default language).
1. To access the Select Language screen, from the main screen, select:
• Configuration
• System Configuration
• Language
2. Select the desired language from the listing.
3. Press Yes at the confirmation pop-up. The screen automatically changes to the
selected language.
4. Press Exit Settings to proceed with the selected language.
Figure 4.2 – Language Screen
Note: On any screen, if you press the screen about 25 times, the System changes
to the default language (English).You must press the same spot on the
screen.