User's Manual

WHITESTAR SIGNATURE System 3 • System Setup

Rx Only – NGP Z370165 Rev. A 1209 3-18

Figure 3.4 – IA Handpiece Assembly

2. Load the FUSION Tubing Pack

3. Open the tubing pack packaging.

4. Install the FUSION pack into the side receptacle, as shown below.

5. Make sure that the pack has a properly attached drainage bag.

Figure 3.5 – Loading the FUSION Tubing Pack

Note: Press the button above the pack to remove the pack.

12 3

1. Infusion Sleeve 4. SOLO Curved Tip

2. SOLO Straight Tip 5. SOLO 45o Silicone Sleeve Tip

3. Handpiece