User's Manual

RX Only – NGP Z370500 Rev. B 1116
6-7
WHITESTAR SIGNATURE PRO System
6 • System Configuration
8. When pairing completes, the progress screen closes and the system displays the
message The foot pedal is now paired with the system.
• If the blue light is on, the wireless foot pedal is paired.
• If the blue light is blinking the wireless foot pedal is not paired.
• If the green light is on, the batteries in the foot pedal are charged.
• If the green light is blinking, the batteries in the wireless foot pedal need to
be charged. See “Charging Options for Wireless Devices” on page 8-5.
9. Test the foot pedal or press Finished to close the test screen.
10. Press Exit to close the Configuration screen.
Wired Pairing
1. On the main screen, press Configuration.
2. Press Wireless Setup.
3. On the Wireless Setup dialog box, press the Advanced Control Pedal button.
Figure 6.7 – Advanced Control Pedal Pairing Screen
4. On the Foot Pedal Pairing screen, press the Wired Pairing button. The system
displays the message Make sure that the cable is attached to the foot pedal.
5. Press the OK button.
6. The system communicates the appropriate data to the foot pedal. When the
system receives the appropriate data back from the foot pedal the system
displays the message Remove the cable from the foot pedal. The system
shows a progress screen during the pairing process.