User's Manual

RX Only – NGP Z370500 Rev. B 1116
6-8
WHITESTAR SIGNATURE PRO System
6 • System Configuration
7. When pairing completes, the progress screen closes and the system displays the
message The foot pedal is now paired with the system.
8. Test the foot pedal or press Finished to close the test screen.
9. Press Exit to close the Configuration screen.
Foot Pedal - Advanced Linear Pedal
Figure 6.8 – Advanced Linear Pedal Pairing Screen
1. On the main screen, press Configuration.
2. Press Wireless Setup.
3. Press the Advanced Linear Pedal button.
4. Follow the instructions on the screen.
5. Press Pair.
• If the blue light is on, the wireless foot pedal is paired.
• If the blue light is blinking (fast) the wireless foot pedal is searching for a
connection.
• If the blue light is blinking (slow) the wireless foot pedal is not paired.
• If the green light is on, the batteries in the foot pedal are charged.
• If the green light is blinking, the batteries in the wireless foot pedal are
charging.
• If the amber light is on, the batteries in the foot pedal need charging. See
“Charging Options for Wireless Devices” on page 8-5.