User's Manual

RX Only – NGP Z370500 Rev. B 1116
6-15
WHITESTAR SIGNATURE PRO System
6 • System Configuration
Surgical Media
Center (SMC)
(Optional)
The Surgical Media Center (SMC) is used to integrate and record the video image
from the surgical microscope and the surgical operating data to be viewed at a later
date and time. The surgery displays on a separate monitor with the instrument
settings. The SMC hardware is attached to the communications port on the rear
panel. (Figure 4.6 – Rear Panel Connections.)
Follow these steps to configure the Surgical Media Center.
1. Press Configuration.
2. Press SMC.
Figure 6.14 – Surgical Media Center (SMC) Dialog Box
3. The system displays an SMC dialog box. Press the appropriate button to choose
one of the three options. You can choose from:
Off - The surgical media center function is disabled.
On - The surgical media center function records continuously, even between
cases
Automatic - The SMC function records only during cases, not between them
Note: A foot pedal switch can be set up to activate the surgical media center
record function.
4. Press Finished to accept the change and close the SMC dialog box.
5. Press Exit to close the Configuration screen.