User's Manual

RX Only – NGP Z370500 Rev. B 1116
6-24
WHITESTAR SIGNATURE PRO System
6 • System Configuration
Figure 6.27 – Database Restored Confirmation Dialog Box
6. Press Finished to close the screen.
7. Press Exit to close the Configuration screen.
Restore All 1. From Configuration, press Restore All.
Note: Make sure that you place the USB device into the USB port on the
back of the system.
Figure 6.28 – Database Restore Screen
2. Select the database to restore from the list.
3. Press Restore Selection.
4. Press OK at the confirmation screen.