User's Manual

RX Only – NGP Z370500 Rev. B 1116
6-25
WHITESTAR SIGNATURE PRO System
6 • System Configuration
Figure 6.29 – Database Restore Confirmation Dialog Box
5. Press Finished to close the screen.
6. Press Exit to close the Configuration screen.
Delete a Backup
Database
You can delete a database from your portable USB device. Contact your AMO
service representative to delete the database from your system's hard drive.
1. Insert the USB device into the port on the back of the system.
2. From Configuration, press Restore All.
3. Select the database to delete from the list.
4. Press Delete Selection.
5. Press Yes at the confirmation screen.
Figure 6.30 – Deletion of Backup Database Confirmation Dialog Box
6. Press Finished to close the screen.
7. Press Exit to close the Configuration screen.