User's Manual

WHITESTAR SIGNATURE PRO System
8 • Error Messages Troubleshooting and Diagnostics
RX Only –NGP Z370500 Rev. B 1116
8-5
Charging Options
for Wireless Devices
Figure 8.3 – AC Charger for the Foot Pedal
1. AC Charger 3. Foot Pedal
2. Foot Pedal Cable
1. Disconnect the foot pedal cable from the console.
2. Attach the AC charger cable to the foot pedal cable.
3. Plug the AC charger into a power receptacle.
Note: When the green light is no longer blinking, the foot pedal batteries are
charged.
Figure 8.4 – AC Charger for the Remote Control
1. AC Charger 2. Remote Control
1. Attached the AC charger cable to the remote control.
2. Plug the AC charger into a power receptacle.