User's Manual

WHITESTAR SIGNATURE PRO System
5 • Program Settings
RX Only – NGP Z370500 Rev. B 1116
5-29
Figure 5.21 – Program Lock Button
Copy a Surgeon
Program
You can copy the settings of one surgeon program for use by another surgeon. To
copy a surgeon program:
1. Select a program name on the list.
2. Press .
3. Select a surgeon and program from the Copy Program list.
4. Press
Enter.
5. Press if you need to edit the name of the program.
Program – Assign
Order
1. Select a program.
2. Use or to move the program names up or down on the Surgeons
and Programs screen.
Note: Assign Program Order is also used to select your preferred program.
By moving a program to the top of the list, that program becomes your
default or preferred program.