User's Manual

WHITESTAR SIGNATURE PRO System
8 • Error Messages Troubleshooting and Diagnostics
RX Only –NGP Z370500 Rev. B 1116
8-22
151 Peristaltic pump stall.
Probable Cause: Encoder, Decoder, or Stepper driver is faulty.
Corrective Action:
1. Reinsert the pack.
2. Prime the system.
3. If the error does not clear or if the error continues to occur, document the error
message and contact AMO for technical service.
201 Phaco communication error.
Probable cause: Bad data sent from the host or communication error.
Corrective action:
1. Check the handpiece connections.
2. Retune the handpiece.
3. If the error does not clear, select End Case.
4. Select Shutdown.
5. Select Yes and wait for the system to power off.
6. Start up the system.
7. Retune the handpiece.
8. If the error still does not clear, replace the handpiece with a new handpiece and
tune the handpiece.
9. If the error still does not clear or if the error continues to occur, document the
error message and contact AMO for technical service.