User's Manual

WHITESTAR SIGNATURE PRO System
5 • Program Settings
RX Only – NGP Z370500 Rev. B 1116
5-13
Phaco Power
Settings
• Continuous
•
Pulse Mode
• Short Pulse
• Long Pulse
• Low Power Pulse
• High Power Pulse
• Single Burst (panel only)
• Multiple Burst (panel only)
• Continuous Burst
From the Phaco Settings screen press to show the Phaco Power selection.
Figure 5.7 – Phaco Power Settings
In addition to the nine phaco power modes, you can also select the WHITESTAR
mode. Additional WHITESTAR Technology information is later in this section.