User's Manual

WHITESTAR SIGNATURE PRO System
5 • Program Settings
RX Only – NGP Z370500 Rev. B 1116
5-21
Figure 5.14 – Phaco Surgical Screen with Occlusion and CASE On
Occlusion Mode Settings
With Occlusion Mode, you can set different aspiration rates for occluded aspiration
as opposed to unoccluded aspiration.
You can set a different vacuum rise time for when the phaco tip occludes without
changing the aspiration rate through an unoccluded needle.
To set the occluded aspiration rate thresholds:
1. Press Phaco.
2. Press Settings.
3. Select the
Occlusion box to enable Occlusion Mode.