User's Manual
WHITESTAR
SIGNATURE
PRO
System
4 •
Surgeon
Settings
RX Only – NGP Z370500 Rev. B 1116
4-34
Follow these steps to set the system sound levels.
1. On the Surgeons and Programs screen, select the surgeon.
2. Press .
Figure 4.26 – Sound Settings Screen
3. Use the sliders to adjust the volume for:
• Instrument
• Confirmation
4. Use the buttons on the right side to turn sounds on or off for the different
system functions.
5. Use the up and down arrows to set the volume for:
• CASE Activation
• Master Volume
Note: You can also change the volume from the main surgical screen with the
button at the top of the screen.
6. Press Save to retain any changes you made.
7. Press Exit.