User's Manual

WHITESTAR SIGNATURE PRO System ADDENDUM
RX Only – NGP Z370530 Rev. A 0915 ADDENDUM-12
NGP680137
WHITESTAR SIGNATURE
PRO Remote Control*
BLUETOOTH
2.0 (one chip)
Class 2 - 3
meters
The quality of service is
ensured by the BLUETOOTH
technology. The
WHITESTAR SIGNATURE
PRO System uses the
touchscreen as the primary
user interface device. In the
rare event of losing
communication between the
remote control and the console,
the user can continue to
operate all system functions by
using the touchscreen.
The wireless communication is
secured by BLUETOOTH
encrypted data technology.
Remote Control Wireless
Technology: Wirelessly and
uniquely connects the Remote
Control to the console to navigate
the GUI display. Function is limited
to a 3 meter range.
The remote control is powered with
an internal rechargeable NiMH
battery, and has a BLUETOOTH 2.0
device that utilizes a TI LMX9830
BLUETOOTH module for its RF
communication. It communicates
with the system via a BLUETOOTH
dongle residing in the system, which
also utilizes a LMX9830
BLUETOOTH module. The remote
control is an accessory that provides
an alternative method for the
operator to navigate through the
different surgical modes, set various
parameters, and perform IV pole
height adjustment.
Functional ability
: The Remote
Control consists of 12 buttons with
their functionality described below:
• IV Pole Up/Down: IV pole height
adjustment.
• Mode: for operator to select
preprogrammed surgeon mode.
• Navigator Up, Down, Left, Right,
and Enter: navigate to access
different functional icons on the
screen within the surgical mode.
• Up, Down, Enter: for operator to
navigate to desired surgical mode.
• Back-light: for operator to turn on
Remote control back-light.
Limitations during device operation
:
The device must be used within the
specified operating range.
Devices RF Wireless
Technology
Operating
Distances
Quality of Service and
Security
Device System Wireless Function,
Capabilities, and Limitations