User`s guide

103
104
Steps Do This
Set ONE-BUTTON 23.
BOLUS.
Scroll to highlight a. On/Off. The default is On.
Press b. Enter button.
Scroll to select c. On or Off.
Press d. Enter button.
If Then do this
On Notice 1. Increment is highlighted.
Press 2. Enter button.
Scroll to select desired increment. 3.
(0.5U or 1.0U).
Press 4. Enter button.
Notice 5. Next is highlighted.
Press 6. Enter button.
O Notice Next is highlighted and Increment is gone from the
screen.
Press Enter button.
Set 24.
BASAL LIMITS. Scroll to highlight a. Increment.
Press b. Enter button.
Note: Increment values are 0.05, 0.10, 0.50, and 1.00 U/h. The default setting is 0.05
U/h.
Scroll to select desired increment.c.
Press d. Enter button.
Notice e. Maximum is highlighted.
Press f. Enter button.
Note: This sets the maximum limit for basal rates when you edit your basal
programs. The default is 2.00 U/h, and the range is 0.05-30.00 U/h.
Scroll to select desired maximum U/h.g.
Press h. Enter button.
Steps Do This
Check that the basal 25.
limit increments and
maximums are correct.
Review a. Increment and Maximum settings on the screen.
Scroll up to select and change any setting as needed.b.
Notice c. Next is highlighted.
Press d. Enter button.
Set Temporary Basal 26.
setting.
Notice a. Temp is highlighted.
Press b. Enter button.
Scroll to select c. Percent or Units.
Example: If your active basal rate is 0.35 U/h, then selecting 75% will set the
temporary basal at 0.26 U/h, which is 75% of the current basal.
Press d. Enter button.
Check that the Temp 27.
Basal setting is correct.
Review your a. Temp setting on the screen.
Scroll up to select and change any setting as needed.b.
Notice c. Next is highlighted.
Press d. Enter button.
Set audio/vibe, low 28.
insulin, and alarms.
If you want to Then do this
Set audio or vibe,
low insulin, and
alarms
Notice 1. OK is highlighted.
Press 2. Enter button.
Go to Step 29.3.
Skip this set up Scroll to highlight 1. Skip.
Press 2. Enter button.
Go to Step 35 to set locked items.3.
Section 6: When You’re Ready – Optional Settings
6.1 Set Up Additional Options – SETUP WIZARD
Section 6: When You’re Ready – Optional Settings
6.1 Set Up Additional Options – SETUP WIZARD
DOC15736_Rev-A-Man.indd 103-104 2/9/09 11:29:43 AM