Installation Instructions



Important



 Thevanitymustnotbeexposedtoexcessivemoisturee.g.directlybesideabathoropen

shower.ThematerialsusedinthemanufactureofAbbyBathvanitiesarewaterresistantNOT

WATER‐PROOF.Iftheinstallationislikelytoencounterexcessivemoisturepleaseconsultyour

merchantforfurtheradvice.



 Thewarrantydoesnotcoveranycostsassociatedwithlabour.

 Donotexposethevanitytosolvents.Onlyusecleaningagentsrecommendedforacrylics.

 Hireaprofessionalcontractorforinstallation.



ToolsandMaterials



Drillanddrillbits Level  TapeMeasureCaulkinggun

LagBolts(supplied) Screwdriver Pencil  SiliconeSealant Cleaningmaterials



WallHungVanityInstallation

Important



WallhungvanitiesMUSTbeinstalledintosolidwoodstuds.Additionalstudsornogsmustbe

strategicallylocatedinthewallforproperinstallation.Failuretoprovideadequatesupportwillvoid

warranty.



1. Inspectthattheunitiscorrectandundamaged.Pleaseretainacopyoftheseinstructionsfor

referencepurposesandwarrantyinformation.



2. Checkallwallsareplumbandstraight



‐ Cabinetsinstalledonwallsbowedineitherthehorizontalorverticalplane,maycause

alignmentand/orsquarenessissues,resultinginhardwaremalfunctioning.



3. Determinetheheightthatvanitywillbemountedat.Thiswilldependontherequiredworking

heightofvanitytopsurfaceandclearancerequirementsbetweentapwareandanymirrors

abovethevanity.



4. Placethecabinetintotheproposedposition(restthecabinetonfirmsupports).Markthe

positionsofanyplumbingoutlets.Accesstothecabinetcanbemadeeasilybytheremovalof

theshelf,doorsand/ordrawers.Referto“Removal&Alignment”section.Whenremovingthe

frontsandshelves,ensuretheirpositionsaremarkedastheymaynotbeinterchangeable.



5. Repositionthecabinetbackontothesupports.Withalevelcheckthatthecabinetisleveled.



PAGE 1
Important     The vanity must not be exposed to excessive moisture e.g. directly beside a bath or open shower. The materials used in the manufacture of Abby Bath vanities are water resistant NOT WATER‐PROOF. If the installation is likely to encounter excessive moisture please consult your merchant for further advice. The warranty does not cover any costs associated with labour. Do not expose the vanity to solvents. Only use cleaning agents recommended for acrylics.
PAGE 2
6. Using the 4 lag bolts provided, secure bolts through the plywood vanity back into studs. If no solid wood studs are available, build a back support for proper vanity installation. 7. Once the cabinet is in position the vanity top can be installed. Please refer to the Vanity Top installation section. Vanity Top Installation 1. Clean the perimeter of the vanity and the underside of the top ensuring they are free of all debris. 2.