Installation Instructions





6. Usingthe4lagboltsprovided,secureboltsthroughtheplywoodvanitybackintostuds.Ifno
solidwoodstudsareavailable,buildabacksupportforpropervanityinstallation.

7. Oncethecabinetisinpositionthevanitytopcanbeinstalled.PleaserefertotheVanityTop
installationsection.



VanityTopInstallation

1. Cleantheperimeterofthevanityandtheundersideofthetopensuringtheyarefreeofall
debris.
2. Applyasmallbeadofneutralcuresilicone(notsupplied)tothefourcornersofthecabinet.
3. Placethevanitytopintoposition


RemovalandAlignmentofDrawers

Removal

1. Makesurevanityisonflatsurfaceandsupported.
2. Pullthedrawertowardsyouandliftupat30‐degreeangle.Forvideoguideline,pleasegoto
https://www.youtube.com/watch?v=W19EbOQ9do0

Alignment

1. Fullyextendbothsides.
2. Placedrawerdirectlyontheslidesensuringtheslidesarecompletelycovered.
3. Closethedrawershutcompletely.(checkthedrawerhascorrectlyengaged)


Date PackBy:
