Manualshelf

6.0

ManualsBrandsABBYY ManualsApplicationsFineReader
31323334353637383940
26
ABBYY FineReader 6.0 User’s Guide
To flip the image:
● horizontally (around the vertical axis) - select the Flip Horizontal item in the Image
menu,
● vertically (around the horizontal axis) - select the Flip Vertical item in the Image
menu.
4. Clear block
If you do not wish a certain image area to be recognized or if you have large areas of dust present on
the image, you can simply erase them. To do this:
● Select the tool and then select the image area you wish to erase by holding down the
left mouse button. Release the button to erase the selected image area.
5. Increase/Decrease the image scale
● Select the / tool on the Image bar (in the Image window) and click the image. The
image scale will double/halve.
● Right-click the image and select the Scale item followed by the desired scale percentage in
the local menu.
6. Get image information
The following image information can be obtained: image width and height in pixels; vertical and hori-
zontal resolution per inch (dpi); image type.
● Right-click the image and select the Properties item in the local menu. A dialog will open.
Select the
Image tab in the dialog.
7. Print image
To print the image open in the Image window, the images of pages selected in the Batch window, or all
batch page images:
● Select the Print Image item in the File menu. The Print dialog will open. Set the required
printing parameters (the printer to be used, number of pages to be printed, number of
copies etc.) in the dialog.
8. Undo the last action
● To undo the last action click the Undo button on the Standard bar .
Tip: To undo the Undo action click the Redo button on the Standard bar .
Each scanned page is given a number. The number given by default is the number of the last batch page
plus one.
You can also set page numbers manually. You might wish to do this, if, for example, you wish to retain
the original page numbers or scan pages according to page number:
● Select the Ask for page number before adding page to the batch item on the Scan/Open
Image
tab (Tools>Options menu).
Page Numbering