6.0

52
ABBYY FineReader 6.0 User’s Guide
following editing), parts of other inactive blocks may become invisible. If this is the case, the borders of
the block(s) concerned will be colored red. When a block is active, its borders are enlarged so as to dis-
play the entire block text.
The following text features are not displayed in draft mode: left indent; paragraph alignment (all para-
graphs are aligned to the left); text and background color. A same-size font (12pt by default) is used
throughout to display text in draft mode. Effects (bold, italic, underlined, superscript and subscript) are
all retained.
Switch between draft and full modes by clicking the (full mode) or (draft mode) buttons in the
Text window.
To change font size in draft mode:
1. Select the Options item in the Tools menu.
2. Set your preferred font size by selecting the
Draft editor font size item on the View tab.
The FineReader built-in editor is supplied
with the following text editing features:
● Copy, cut, paste
● Search and replace
● Font effects
● Text alignment
● Undo and redo
Copy, cut, paste
1. Before you use the copy, cut, and paste commands, highlight the relevant text.
2. Follow the instructions below depending on the action you wish to carry out:
To copy the selection:
● Either click the Copy button on the Standard toolbar or
● Select the Copy command in the Edit menu or in the local menu or
● Press CTRL+C
To cut the selection:
● Either click the Cut button on the Standard toolbar or
● Select the Cut command in the Edit menu or local menu or
● Press CTRL+X
To paste the copied text:
● Either click the Paste button on the Standard toolbar or
● Select the Paste command in the Edit menu or local menu or
● Press CTRL+V
Font
Font size
Bold
Italic
Subscript
Center
Justify
Previous
error
Underlined
Superscript
Align left
Next error
Align right
Display nonprinted
characters