10.0
Table Of Contents
- 1. Introduction
- 2. Creating a Project
- 3. Creating Document Definitions
- 3.1. Creating a Layout
- 3.1.1. Definition Objects’ Geometric Marking
- 3.1.2. Static Elements
- 3.1.3. Field Properties
- 3.1.4. Creating a Document Definition for Multi-Page Documents
- 3.1.5. Creating a Document Definition with Annex Pages
- 3.1.6. Export Settings
- 3.1.7. Configuring Recognized Data Presentation
- 3.1.8. Testing Document Definitions
- 3.1.9. Editing and Publishing a Document Definition
- 3.2. Creating a FlexiLayout
- 3.3. Specifics of Non-structured Documents
- 3.1. Creating a Layout
- 4. Configuring Project Properties
- 5. Configuring Batch Types
- 6. Configuring Image Import
- 7. Uploading a Project to the Server
- 8. Keyboard Shortcuts
© 2011 ABBYY. All rights reserved.
21
3.1.3.4. Verification settings
Verification is checking recognized data by an operator. During Document Definition creation, you can
configure the verification settings on the Verification tab of the Field Properties dialog box (Figure 11).
Uncertainly recognized characters will be highlighted by the program and sent to an Operator for checking.
However, it is also possible to configure verification in such a way, that the field will be sent to an
Operator even if there are no uncertain characters, or vice versa, won’t be sent for checking even if there
are uncertainly recognized characters. Choose all (required verification) if you want to be absolutely sure
there is no error in the field value.
Character inclusion in group and field verification can be enabled by selecting the corresponding option(s).
Group verification applies to checkmarks and digits most. Other characters can also be verified in group
verification, if the corresponding option is selected for the field. Checkmark groups can be also sent to
field verification. You can select whether to send field to field verification always or only if it has
highlighted characters or format errors.
You can also use double verification mode where field is verified by two different operators. If merged
verification results match the document is sent to the next stage. Otherwise additional check is carried out.
Figure 11. Field Properties dialog box, Verification tab