10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
100
Setting Up the Cluster Nodes
Next you must set up the cluster nodes Node1 and Node2. The instructions below apply to Node1. The other nodes are set up
identically.
Setting Up the ABBYY FlexiCapture 10 Processing Server Local Service
To set up the service, complete the following steps:
1. Enter the following command in the command line (cmd.exe):
sc config ABBYY.ProcServer.FlexiCapture.10 binpath= "%systemdrive%\Program Files (x86)\ABBYY FlexiCapture
10 Servers\FlexiBRSvc.exe \service -stationType:server -inifile:\\fc10procserver\ClusterTemp\ServerSettings.xml"
This command changes the default settings for the process ABBYY.ProcServer.FlexiCapture.10, which is launched
from the file "%systemdrive% \ Program Files (x86) \ ABBYY FlexiCapture 10 Servers \ FlexiBRSvc.exe", and
sets the path to the following file that contains the settings for the Processing Server: \ \ fc10procserver \ ClusterTemp
\ ServerSettings.xml. Now the file ServerSettings.xml will be stored in the shared folder and will be available to all
nodes in the cluster.
2. Find the service ABBYY FlexiCapture 10 Processing Server in the list of services (Start > Administrative Tools >
Services). Right-click the service and choose Properties.
3. Make sure that the parameters you typed in the command line are displayed in the Path to executable field.