10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
22
3. Execute the following command from the command line:
%system-
drive%\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe –i
4. The list of IIS service extensions (see below) will now include an entry for the 32-bit version of ASP.Net. Change its
status to allowed:
Installing the servers
Once you have made the preparations for installing the Application Server, install the servers.
By default, all servers are installed on the same computer. However, you can install them on different computers by disabling the
redundant servers in the setup program.
To install the ABBYY FlexiCapture servers:
1. In the Autorun menu, select Distributed Installation. Next, select Install Servers to start the installation.
2. Select a setup language. The setup program will compare the locale of your system and the selected language. If the lan-
guages are incompatible, a warning message is displayed.
3. Next, the setup program checks the version of your operating system and the availability of the administrative permis-
sions. If the version of the operating system is not supported by the program or you do not have the administrative per-
missions, a warning message is displayed and the setup program is terminated.