10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
25
System components in IIS and their configuration
This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured
automatically during installation and required no manual configuration. However, in case of errors this section can help you to
check the settings specified in IIS.
Application pools
During the installation of the Application Server, the installer automatically adds three IIS application pools associated with
ABBYY FlexiCapture 10. Application pools enable interaction with workflows bound to one or more applications and sharing
data between them.
FlexiCapture 10 Monitoring – enables operation of the Administration and Monitoring Console
FlexiCapture 10 Web Services – enables operation of the Application Server.
FlexiCapture 10 Web Stations – enables operation of the web stations: Web Verification station, Web Data Verification station,
Web Capture station.
All pools are configured automatically during the installation of ABBYY FlexiCapture. Pool settings critical for correct operation
of the Application Server, are listed below:
- .Net Framework Version = v4.0
- Managed Pipeline Mode = Integrated
- Identity = NetworkService
ABBYY FlexiCapture 10 application pools work in 32-bit mode. In IIS Manager Console, you can check if 32-bit mode is en-
abled. For this, do the following:
1. Run the IIS Manager Console from the menu: Start -> Administrative Tools -> Internet Information Services (IIS)
Manager.
2. Choose Application Pools.