10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
27
Default Web Site\FlexiCapture10\Server\WebServices.dll – a web service of the Application Server which supports both Win-
dows and Basic authentication.
Default Web Site\FlexiCapture10\Server\WebServicesExternal.dll – a web service of the Application Server which supports
authentication by means of the FlexiCapture Authentication Module (will be added if FlexiCapture Authentication Module was
selected during the installation of ABBYY FlexiCapture 10 Servers).
Default Web Site\Login – a web-based interface for login and registration (will be added if FlexiCapture Authentication Module
was selected during the installation of ABBYY FlexiCapture 10 Servers)
Default Web Site\DataVerification – Web Data Verification Station (will be added if the Web Stations component is selected
during the installation of ABBYY FlexiCapture 10 Servers)
Default Web Site\Verification – Web Verification Station (will be added if the Web Stations component is selected during the
installation of ABBYY FlexiCapture 10 Servers)
Default Web Site\Scanning – Web Scanning Station (will be added if the Web Stations component is selected during the installa-
tion of ABBYY FlexiCapture 10 Servers)
Default Web Site\Capture – Web Capture Station (will be added if the Web Stations component is selected during the installa-
tion of ABBYY FlexiCapture 10 Servers)
Authentication settings for FlexiCapture 10 Web Applications
To control access to the applications via http protocol, it is necessary to configure authentication settings (login/password-based
connection verification of a user’s identity). For this, choose a desired application and then choose the Authentication item.
Then select a required authentication method from the list and enable it.