10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
30
Default Web Site\Verification (Web Verification Station) - only Anonymous authentication is enabled.
Default Web Site\Scanning (Web Scanning Station) - only Anonymous authentication is enabled.
Default Web Site\Capture (Web Capture Station) - only Anonymous authentication is enabled.
If FlexiCapture Authentication Module was installed, the following authentication settings are specified in IIS:
Default Web Site\FlexiCapture10 (Administration and Monitoring Console) - only FlexiCapture authentication is enabled for
this folder and all its files and subfolders, except for the Default Web Site\FlexiCapture10\DBConnection.aspx page, for which
only Windows authentication is enabled, and the Server folder. For all pages, except for the DBConnection.aspx page, redirecting
to the Default Web Site\Login page is configured in case of HTTP 401 error which enables automatic switching to login page if
the user cannot pass the FlexiCapture authentication.
Default Web Site\FlexiCapture10\Server (Application Server) - Windows, Basic and FlexiCapture authentications are enabled
for this folder and all its files and subfolder, except for the Default Web Site\FlexiCapture10\Server\WebServices\External.dll
file, for which only FlexiCapture authentication is enabled.
Default Web Site\Login (web-based interface for logging on of existing users or registration of new users) - only Anonymous
authentication is enabled.
Default Web Site\DataVerification (Web Data Verification Station) - only Anonymous authentication is enabled.
Default Web Site\Verification (Web Verification Station) - only Anonymous authentication is enabled.
Default Web Site\Scanning (Web Scanning Station) - only Anonymous authentication is enabled.
Default Web Site\Capture (Web Capture Station) - only Anonymous authentication is enabled.
Handler Mappings
In IIS services, handlers process requests to sites and applications. The handlers are mapped to resources on a web server and
create responses to those requests. Like the modules, the handlers are implemented using native or managed components, such a
dynamic DLL or managed code.
After the installation of ABBYY FlexiCapture 10 Application Server, the installer performs the following actions:
1) Adds to IIS the mappings required for correct processing requests from the Application Server. These mappings can be
view in the IIS Manager console. For this, select the Handler Mappings item for Default Web
Site\FlexiCapture10\Server (the Application Server).