10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
33
«FlexiCapture 10 Web Services» extension (path «C:\inetpub\wwwroot\FlexiCapture10\Server\WebServicesIsapi.dll») must be
allowed.
Checking the operation of IIS
To ch
eck the operation of IIS, start IIS by selecting StartÆControl PanelÆAdministrative ToolsÆInternet Information Ser-
vices. If a problem occurs when starting IIS, the following message will be displayed: “Unexpected error 0x8ffe2740 occurred”
for v. 5.1 (Windows XP) or “The process cannot access the file because it is being used by another process” for v. 6.0 (Windows
2003), v. 7.0 (Windows 2008) and v. 7.5 (Windows Server 2008 R2).
This error message means that port 80 is in use
. To find out which application is using the port, do the following:
1. In the command line (StartÆRun), type
netstat -anop TCP|find ":80"
The list of connections to port 80 will be displayed and the ID of the corresponding process in the following format:
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 1264
2. Type
tasklist /SVC /FI "PID eq 1264"
replacing 1264 with the ID of the process obtained at step 1. The result will be displayed in the following format:
Image Name PID Services
================================
Virus.exe 1264 KillMePlz
3. End the process that uses the port.
Important! Do not switch IIS over to another port, as you will not be able to start the Application Server in this case.
Switching system components to 64-bit mode
Important! This configuration is not recommended (e.g., pool of the Application Server (FlexiCapture 10 Web Services) does not
work in 64-bit mode). In particular, when using Oracle as a database server, the Oracle client through which a connection to the