10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
34
database is performed must work in the same bit mode as both the pool of Administration and Monitoring console (FlexiCapture
10 Monitoring) and the pool of Application Server. If you switch the pool of Administration and Monitoring console to 64-bit
mode, it will work in a different mode than the Application Server pool (which works in 32-bit mode). A possible solution is to
install two identically configured Oracle clients one of which works in 32 bit mode and the other in 64 bit mode.
You may need to switch the pool of Administration and Monitoring console to 64-bit mode if you are using Crystal Reports x64
(a tool for generating reports), as they must work in the same bit mode, and using Crystal Reports x32 is not possible.
By default, the pool of the Administration and Monitoring console works in 32-bit mode. To switch it to 64-bit mode, do the fol-
lowing:
1. Open IIS Manager Console: Start -> Administrative Tools -> Internet Information Services (IIS) Manager.
2. Choose Application pools.