10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
40
The Publish to User and Assign to User methods are not supported.
When deploying ABBYY FlexiCapture 10 using Active Directory®, the account of the computers in the Domain Computers
domain must have read right to the administrative installation folder.
Example: Deploying ABBYY FlexiCapture 10 using Active Directory
The program is installed on one domain computer or on a group of domain computers:
1. During Server Installation, install the Station Installer. If you did not install the Station Installer when installing the Ap-
plication Server, install the Station Installer by selecting Control PanelÆAdd or Remove ProgramsÆChange.
2. Select StartÆControl PanelÆAdministrative and then select the Active Directory Users and Computers item.
3. Right–click the site, domain, or another organized unit that contains the computer or group of computers onto which
ABBYY FlexiCapture 10 is to be installed.