10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
46
Important! You cannot create Distribution Points.
Installing Remote Stations
Using Remote Stations allows you to connect to the Licensing Server from the computers which are not part of the LAN. Remote
Stations include the Data Verification and Scanning stations. The Verification station can be both regular and remote.
Remote Stations can connect to the Application Server via HTTP.
To install Remote Stations:
1. Select Distributed Installation.
2. Select a menu item corresponding to a station to be installed.
3. Select a setup language. The setup program will compare the locale of your system and the selected language. If the lan-
guages are incompatible, a warning message is displayed.
4. Next, the setup program checks the version of your operating system and the availability of the administrative permis-
sions. If the version of the operating system is not supported by the program or you do not have the administrative per-
missions, a warning message is displayed and the setup program is terminated.
5. If all the checks are passed successfully, the end-user license agreement will be displayed. Read the license agreement
carefully and if you agree with the terms of the agreement, select the corresponding option and click Next.
6. A dialog box will open prompting you to enter some information about yourself. Enter the required information and con-
tinue with the installation.
7. Next, select a destination folder. By default, the program is installed to: %systemdrive%\Program Files\ABBYY
FlexiCapture 10 <Station>\. If there is not enough space on the selected hard disk, a window is displayed showing your
hard disks, the available free space, and the space required by the installation. Select a disk with sufficient free space and
continue with the installation.
8. The program files will be copied onto your computer. Once the installation is finished, the setup program will display a
message saying that the installation has completed successfully.
IMPORTANT!
1. The Application Server should be published to the Internet if you wish to use the remote stations over the Internet.
2. The Processing Server should be started to use remote stations.
3. Basic-authentication should be enabled in IIS in the Default Web Site\FlexiCapture10\Server folder to use such authen-
tication type when connect to the Application Server.