10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
6
2. Select a setup language. The setup program will compare the locale of your system and the selected language. If the lan-
guages are incompatible, a warning message is displayed.
3. Next, the setup program checks the version of your operating system and the availability of the administrative permis-
sions. If the version of the operating system is not supported by the program or you do not have the administrative per-
missions, a warning message is displayed and the setup program is terminated.
4. If all the checks are passed successfully, the end-user license agreement will be displayed. Read the license agreement
carefully and if you agree with the terms of the agreement, select the corresponding option and click Next.
5. A dialog box will open prompting you to enter some information about yourself. Enter the required information and con-
tinue with the installation.
6. In the next dialog box, select one of the available installation modes:
• Administrator Station – The setup program installs the Administrator Station, FormDesigner 10, and FlexiLayout
Studio 10.
• Operator Station – The setup program installs only the Operator Station. (The Administrator Station,
FormDesigner 10 and FlexiLayout Studio 10 will not be installed).
• Administrator and Operator Station – The setup program installs the Administrator Station, the Operator Station,
FormDesigner 10 and FlexiLayout 10. By default this configuration is installed.
7. Next, select a destination folder. By default, the program is installed to %systemdrive%\Program Files\ABBYY
FlexiCapture 10. If there is not enough space on the selected hard disk, a window is displayed showing your hard disks,
the available free space, and the space required by the installation. Select a disk with sufficient free space and continue
with the installation.
8. The program files will be copied onto your computer. Once the installation is finished, the setup program will display a
message saying that the application has been successfully installed.
9. FlexiCapture 10 License Manager will be launched automatically so that you can activate your serial number. See the
Managing Licenses section for details.
Note: For information about configuring multiple workstations to work with a single license server, see “Connecting stations to
the Lic
ensing Server”.
Command line installation
In the default configuration, all recognition languages are installed on the local computer and the interface language is selected
automatically based on the regional settings of the computer on which the program is installed. The default configuration includes
the Administrator and Operator stations, guides, help files, ABBYY FlexiLayout and ABBYY FormDesigner tools and FlexiCap-
ture 10 License Manager.
Run the setup.exe file located in the administrative installation folder using the command line options described below.
Advertise installation
For
advertise installation, type
Setup.exe /j
The stations icons will appear in the Start menu. Clicking this icon automatically installs the program in default configuration.
Clicking the Administrator Station icon installs the Administrator Station, guides, help files, ABBYY FlexiLayout and ABBYY
FormDesigner tools and FlexiCapture 10 License Manager.
Clicking the Operator Station icon installs the Operator Station, help files and FlexiCapture 10 License Manager.
Silent installation
In the case of
silent installation, no setup dialog boxes are displayed and the program is installed in default configuration.
Setup.exe /qn
Change “/qn” to “/qb” if you want an installation progress bar to be displayed.
No other dialog boxes will be displayed.
Additional command line options
/L<language code> disables auto selection of the interface language and installs the program with the interface language you
specified.
The following language code values are available:
1033 English
1049 Russian
1031 German
1036 French