10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
65
Note: If the Reset Password button is missing, it means that the user password has already been changed to a default pass-
word password.
Self-registration of users through the web interface
This method of adding users applies when a large number of users are remote operators (e.g. working through a web-based in-
terface) and do not belong to the domain where the Application Server is installed. To use this method, the Authentication
Module feature must be installed.
To enable operators outside of the domain where the Application Server is installed to be authenticated on the Application
Server, it is recommended to use FlexiCapture authentication. For this, the Authentication Module feature must be installed.
New users can self-register in the system through the web-interface following the Registration link on the http://<server
name>/Login page.
Note: For the web-application http://<server name>/Login, anonymous authentication is enabled in IIS settings, so the regis-
tration page can be accessed by any user.
After filling in the registration form and clicking Sign up, the user will be added to the system and redirected to the personal
page.
Clicking on the Create Request link, the user can create a request for access rights and roles.