10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
68
ing Console. If the service of the Processing Server is started under a different user, it is necessary to assign the role to
this user.
2. Start the Processing Server Monitor (StartÆABBYY FlexiCapture 10 ServersÆProcessing Server) for further con-
figuration.
3. In the Processing Server Monitor, select the menu item ActionsÆProperties and in the dialog box that opens, specify
the address of the Application Server (e.g, http://ApplicationServer). If the Processing Server and the Application Server
are installed on the same computer, the address of the Application Server will be specified automatically.
4. Start the Processing Server using the button.
5. Add Processing stations. For this, in the server tree, select Stations and click . In the dialog box that opens, select
the stations by the computer name or find them in the network:
After adding a station you specify its parameters in the Station Properties dialog box (Actions -> Properties menu).
The station is started automatically within a minute. If the station requires a long-term setting or you do not want to start
the station, deselect the Start automatically option in the station properties.
To start desired stations manually, select them from the list in the main window of the Processing Server Monitor and
start them by clicking the button.
Note: It is not recommended to install the Processing Station on the computer where FlexiCapture servers are installed
as it reduces the performance of server.
6. If in some projects it is necessary to import images from hot folder, enable hot folders in the Processing Server Moni-
tor using the corresponding item in the server tree: