10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
74
Connecting certificate in IIS on Windows 7
In IIS settings, connect HTTPS protocol for Default Web Site. For this:
1. Run IIS Manager Console from the Control Panel.
2. Choose Default Web Site and on the Actions panel, click the Bindings link.
3. In the dialog box that opens click Add and select “https” protocol from the “Type” drop-down list.
4. From the “SSL Certificate” drop-down list, select a desired certificate and click Ok.
5. If you want the site to be available via https only, then choose it in the tree of sites, open SSL Settings and select the op-
tion «Require SSL».
Note: Verification of client certificates is not performed, so when configuring SSL, set the value of the «Client certificates» op-
tion to Ignore.
Once the certificated is connected, the “https” protocol must be written in the address of the Application Server and the computer
name must match the name for which the certificate is issued: https://<server name>.