10.0
Table Of Contents
- Installing ABBYY FlexiCapture 10
- Standalone Installation
- Distributed Installation
- System Requirements
- General information
- Preparing the Application Server for installation on Windows 2012
- Preparing the Application Server for installation on Windows Server 2008 R2
- Preparing the Application Server for installation on Windows 2003
- Installing the servers
- External components required for the correct operation of the system
- System components in IIS and their configuration
- This section describes the IIS configuration which is necessary for the operation of FlexiCapture. This configuration is configured automatically during installation and required no manual configuration. However, in case of errors this section can help you to check the settings specified in IIS.
- Application pools
- Authentication settings for FlexiCapture 10 Web Applications
- Handler Mappings
- ISAPI and CGI Restrictions
- Checking the operation of IIS
- Switching system components to 64-bit mode
- Database server
- Interaction of the system components
- Installing the stations
- Using Active Directory
- Using SMS
- Installing Remote Stations
- Updating your earlier ABBYY FlexiCapture 10 releases to Release 6
- Upgrading from ABBYY FlexiCapture 9.0
- Upgrading from ABBYY FlexiCapture 8.0 Professional
- Upgrading from ABBYY FormReader 6.5
- Managing Your Licenses
- Setting Up FlexiCapture 10 Distributed Installation
- Logging
- Working with Clusters
- Technical Support
© 2011 ABBYY. All rights reserved.
85
Basic Configuration of the Failover Cluster
In this example, the processing server is deployed on a FOC cluster (FOC.cluster2008r2.ru). The cluster uses a network with the
address 192.168.0.0/24 and the domain cluster2008r2.ru.
The cluster consists of two nodes: Node1 and Node2.
Addressing in the Cluster
The Node1 and Node2 nodes have two network interfaces: one interface belongs to the 192.168.0.0/24 network, the other may
belong to your local area network (for example 10.0.0.0/16). The data storage only interfaces with the 192.168.0.0/24 network and
is available only to the cluster nodes (i.e. Node1 and Node2).
Both networks are available to the cluster FOC.cluster2008r2.ru. Cluster traffic should only be allowed in the designated network
192.168.0.0/24 for security and workload balancing reasons. External users can access the data storage through requests to Node1
and Node2. In order to allow cluster traffic in the 192.168.0.0/24 network, open the Failover Cluster Manager, select Cluster
Network in the Networks group, and choose Enabled in the Cluster Use column (see the screenshot below).
Interfaces and networks:
Interface Network Description
Storage 192.168.0.1/24 Centralized storage
Node1 192.168.0.11/24 Cluster node
Node2 192.168.0.12/24 Cluster node
FOC 192.168.0.10/24 Cluster address
FC10ProcServer 192.168.0.2/24 Address of the service running in the cluster
Domain users
To set up domain user accounts:
1. Create two domain users, for example cluster2008r2\node1admin and cluster2008r2\node2admin.
2. Give administrator rights to cluster2008r2\node1admin on Node1 and to cluster2008r2\node2admin on Node2.