11.0

© 2014 ABBYY Production LLC. All rights reserved.
57
- can be authenticated using standard IIS authentication, if the user’s login in the system matches the user’s Win-
dows login. In this case, the Windows password must be used for authentication. If the user is not in the domain
where the Application Server is located, the pass-through authentication can be used.
- can be authenticated by means of the FlexiCapture Authentication Module, if that feature is installed. In this case,
a login and a temporary password password specified by the administrator are used for authentication (the pass-
word must be changed at first logon to the Web station or on the page http://<server
name>/FlexiCapture11/Login).
Importing users from Active Directory
This method of adding users is usually used when the system is installed in a domain and users of the system are
employees of the organization whose accounts are stored in Active Directory.
To import users from Active Directory, the FlexiCapture administrator should open the Administration and Monitor-
ing Console and on the Permissions -> Users page, click the Import button. Both individual users and existing
user groups can be imported.
Users added in this way can be authenticated by IIS standard authentication using their Windows logins.
If the Authentication Module feature is installed and you want to enable user authentication by means of the
FlexiCapture Authentication Module, go to the page where user permissions and roles are edited and set a tempo-
rary password for each user using the Reset Password button.
Note: If the Reset Password button is missing, it means that the user password has already been changed to a
default password password.
Self-registration of users through the Web interface
This method of adding users applies when a large number of users are remote operators (e.g. working through a
web-based interface) and do not belong to the domain where the Application Server is installed. To use this meth-
od, the Authentication Module feature must be installed.
To enable operators outside of the domain where the Application Server is installed to be authenticated on the Ap-
plication Server, it is recommended to use FlexiCapture authentication. For this, the Authentication Module feature
must be installed.
New users can self-register in the system through the Web interface following the Registration link on the
http://<server name>/FlexiCapture11/Login page.
Note: For the Web application http://<server name>/FlexiCapture11/Login, anonymous authentication is enabled
in IIS settings, so the registration page can be accessed by any user.
After filling out the registration form and clicking Sign up, the user will be added to the system and redirected to
their personal page.