12.0

23
ABBYY FlexiCapture Administrator`s guide
1. If Processing Station is selected, a dialog box will appear, where you must select the account
under which the Processing Station service will run. By default, the service runs under the
NETW O R K SER V ICE user account. If you plan to import/export data on this station from/to a
storage location with restricted user permissions, or if this station is not in the domain, you can
specify the user that has the appropriate permissions. In this case, the Processing Station service
will run under this user .
2. When installing FlexiLayout Studio, FormDesigner, V erification Station or Project Setup Station,
provide the name or the IP address of the Licensing Server in the next dialog box that opens
(specify the name without “\” , for example: MainServer).
See also: Silent installation.
Installing remote stations
Remote stations allow you to connect to ABBYY FlexiCapture servers from computers that are not part
of your LAN. Remote stations include V erification Station, Data V erification Station, and Scanning
Station.
Remote stations can connect to the Application Server using HTTP/HTTPS.
To install remote stations, click Distributed Installation on the Autorun menu, click the desired remote
station, and follow the instructions of the setup wizard.
Important! If you wish to use remote stations over the Internet, the Application Server must be
accessible over the Internet and the Processing Server must be running to enable exchange of
information with the Licensing Server. If basic authentication is to be used for remote stations, basic
authentication must be allowed in IIS in Default Web Site \ FlexiCapture12 \ Server .
Silent installation
Installing ABBYY FlexiCapture in silent mode
In the case of silent installation, no setup dialog boxes are displayed and the program is installed in the
default configuration.
Setup.exe/qn
Change “ /qn ” to “ /qb ” if you want an installation progress bar to be displayed. No other dialog boxes will
be displayed.
Additional command line options
/L < language code > disables the automatic selection of the GUI language and installs the program with
the interface language of your choice.
The following language code values can be specified:
1033 English
104 9 Russian
/ V< command line > passes the command line directly to msiexec.exe. The < command line > string can
be replaced with the following commands:
ADDL O CAL = ApplicationServer,WebStations,ProcessingServer,ProtectionServer,