12.0

35
ABBYY FlexiCapture Administrator`s guide
“ published ” status. To publish the Document Definitions, on the Project Setup Station, select
Project → Document Definitions … , then select the Document Definitions to publish and
click Publish .
b. O nce a project has been updated, upload it onto the Application Server by selecting File →
Upload Project to Server in the main menu of the Project Setup Station. For more
information about uploading projects to the Application Server, see the Creating and opening
projects section.
Updating ABBYY FlexiLayout Studio 10 or 11 projects (*.fsp)
All FlexiLayout Studio 10 or 11 projects can be opened in FlexiLayout Studio 12. Please note the
following:
1. It is impossible to open an .fsp-project in ABBYY FlexiLayout Studio 10 or 11 once it was opened
in ABBYY FlexiLayout Studio 12, so you should create a copy of the project before opening it in
ABBYY FlexiLayout Studio 12 if you still need to open it in ABBYY FlexiLayout Studio 10 or 11.
2. After opening a FlexiLayout Studio 10 or 11 project in ABBYY FlexiLayout Studio 12 you may need
to delete all processing results and analyze all pages once again.
3. Due to changes in FlexiLayout language some compilation errors may occur. In this case you will
need to correct errors and re-compile FlexiLayouts.
Using FlexiLayouts (*.afl) created in ABBYY FlexiLayout 10 or 11
FlexiLayouts compiled in ABBYY FlexiLayout 10 or 11 can be loaded into ABBYY FlexiCapture 12.
Sometimes due to changes in FlexiLayout language some compilation errors may occur. In this case
open the * .fsp project in ABBYY FlexiLayout Studio 12, correct the errors and re-compile FlexiLayouts.
See Updating ABBYY FlexiLayout Studio 10 or 11 projects ( * .fsp) for detailed instructions.