8.0

© 2009 ABBYY. All rights reserved.
49
Figure 24. The program main window, page thumbnails mode
To begin verifying the recognized data, click Run Verification…
Group verification means grouping character images which have been recognized as having an identical
value and displaying them on the verification screen in order to confirm correctly recognized characters
and leave for the next stage only those characters which are either incorrect or uncertain (Figure 25).
During group verification, the operator can view the image of the field where the checked character is
found. To do so, select Show Character Image from the shortcut menu of the selected character or
press F2. By positioning your cursor over the checked character, you can also activate the mode which
will display the field where the character is found. To do so, in the verification window, select
View > Field Image > Show Field Image or press Ctrl+I.
To correct incorrectly recognized characters, proceed as follows: select a character that does not
correspond to the group character and enter its correct value. The entered value will be displayed in
green in the upper left-hand corner of the character image. If you are not sure of the value of the
character even after you have viewed its context, left-click the character to mark it with a red
interrogatory mark. You can also change the character status using the button on the Toggle toolbar.
To confirm a correctly recognized character, select Confirm from the context menu. Alternatively, on
the toolbar click Confirm All to confirm all displayed characters at once.