9.0
Table Of Contents
© 2009 ABBYY. All rights reserved.
11
/V <command line> passes the specified command line directly to msiexec.exe. The <command line> string can be replaced with
the following commands:
INSTALLDIR="<destination>" – the path to the folder where ABBYY FlexiCapture 9.0 is to be installed.
STATIONS=0,1,2,3,4,5,6 – the list of stations to install.
The numbers 0 to 6 correspond to the following stations:
0 – Scanning Station
1 – Processing Station
2 – Verification Station
3 – Data Verification Station
4 – Project Setup Station
5 FlexiLayout Studio
6 FormDesigner
ACCOUNTTYPE=Custom, LOGIN=user name, PASSWORD=password
You can specify an account under which to run the Processing Station service.
Example:
Setup.exe /qn /L1049 /v INSTALLDIR="D:\FC90" STATIONS=1,4 ACCOUNTTYPE=Custom
LOGIN=Domain\UserLogin PASSWORD=PSWD
As a result, the Processing and Project Setup Stations will be installed into D:\FC90, and Russian will be used the language of the inter
face. The Processing Station service will run under the account Domain\UserLogin and the password will be PSWD.
Removing ABBYY FlexiCapture in silent mode
msiexec /x {FC90000C000100000000074957833700}
Using Active Directory
Microsoft© Windows© 2000 Server and Microsoft© Windows© 2003 Server include an integrated directory service, Active Direc
tory, which in turn includes Group Policy. The Software Installation snap–in, which is part of Group Policy, allows you to install a
software application on several workstations simultaneously.
Three major installation methods are implemented in Active Directory: Publish to User, Assign to User, and Assign to Com
puter. ABBYY FlexiCapture 9.0 can be installed using the Assign to Computer method. ABBYY FlexiCapture 9.0 will be installed on
the specified workstation after the workstation is restarted.
The Publish to User and Assign to User methods are not supported.
When deploying ABBYY FlexiCapture 9.0 using Active Directory®, the account of the computers in the Domain Computers domain
must have read right to the administrative installation folder.
Example: Deploying ABBYY FlexiCapture 9.0 using Active Directory
The program is installed on one domain computer or on a group of domain computers:
1. During Server Installation, install the Station Installer. If you did not install the Station Installer when installing the Applica
tion Server, install the Station Installer by selecting Control PanelÆAdd or Remove ProgramsÆChange.
2. Select StartÆControl PanelÆAdministrative and then select the Active Directory Users and Computers item.