Operation Manual

EN - 06
1. Fitting the cover
Fasten the zip to attach the cover to the cot. Fasten the press studs to connect the cover with the inside
of the hood.
2. Adjusting the handle
To adjust the handle, press the knobs on both sides.
Now you can adjust the handle.
3. Fastening and unfastening the harness
a. Push the two clips together to fasten the harness.
Adjust the harness to a setting where the baby is held in the correct position.
b. Press the red button to unfasten the harness.
4. Adjusting the backrest
Pull and hold the catch on the head end of the cot. Choose the required position and then release the
catch.
CAUTION: The backrest of the carrycot must always be set to its lowest
position for use in vehicles.