目錄 Product Features ........................................................................ 1 Notes ......................................................................................... 2 Product Appearance ................................................................... 3 Hardware Installation Guideline .................................................. 4 Operational Guideline................................................................. 6 i. Turn on / Turn off ..................................
Product Features Product Features ● High-definition video recording: HD 720P ● Auto loop recording: with No Interval Time File Saving Technology; no gap between each interval, every second count. ● Emergency record function for protecting important incidents. ● CMOS HD Sensor ● Ultra-Wide-angle lens: 120 degrees flat wide angle lens, reduce distortion cause by fisheye lens. ● G-Sensor: V10 will automatically record and protect the file when have an accident or impact occur. ● 2.
Notes Notes Usage 1. Please use Class6 (or higher class) Micro SD card, to avoid the lag of image. 2. Please format the memory card with V10 before using it, while formatting DVR player will automatically stored in to memory card. 3. Please use Abee V10 original car charger and accessories. 4. In vehicles where power to the cigarette lighter remains on after the engine has been turned off, please remove the cigarette lighter plug to avoid draining your car battery or other accidents. 5.
Product Appearance Product Appearance ○1 ○2 ○3 ○4 ○5 ○6 ○7 ○8 ○9 ○10 ○11 ○12 ○13 ○14 On/Off Key Menu/Exit Key Up/Photo Key/Delete Down/Stop/Lock、Unlock Record/Lock/OK/Pause、Resume Display Recording indicator Bracket slot Memory card slot(Micro SD) Mini USB port RESET Lens Speaker Microphone 3 English V10 Car Recorder Manual
Hardware Installation Guideline Hardware Installation Guideline Installation 1. Connect the device with the bracket by inserting the screw hole on top of your device in the screw of the bracket; turn the screw knob in clockwise direction until it firm. 2. Place your Driving Recorder in the proper position, stick the suction plate to the windshield, and press the plate button to 3. 4. 5. 6. secure the stand.
Uninstall 1. Uninstall the device: hold the bracket firmly, turn the device in clockwise direction. 2. Uninstall car bracket: Pull up the car stand suction plate button to remove it. Installation Recommendations 1. Install your product as close as possible to the rear view mirror in your car to get the best view. 2. The lens should be in the area that windshield can be cleaned by your wipers to get good images on a rainy day. 3.
Operational Guideline Operational Guideline i. Turn on / Turn off 1. Turn on When the device is not connect to external power, press ON/OFF key and hold for 2 seconds to turn on the device. 2. Turn off When the device is power on, press ON/OFF key and hold for 2 seconds to turn off the device. 3. Auto turn on and off ※ When the car charger is powered by the cigarette lighter socket, your device will automatically turns on when the engine is started.
2. Auto Recording In the auto recording mode, the device will turns on and enters the recording mode automatically when the power is connected. 3. Stop Recording Under recording mode, press 4. key to stop recording. Stop recording after power off Under the recording mod, when turn off the power, the device will stops recording, saves the file and automatically turns off.
iii. Emergency Recording 1. Under the recording mode, press key for Lock, the device will automatically lock the file, on the upper right corner of the screen will immediately show "lock" icon, the file will not be deleted from loop recording, and press key to stop recording. 2. With the collision detection on: when the collision occurs, the device will automatically trigger the emergency recording mode to protect the file.
iv. Video playback/Locked file/Unlock/Delete 1. Vide preview Under general mode, press use key to choose Play, to enter the video playback menu, key to select the file type Normal Records or Locked Records, Press key to choose OK, after choosing the type of video, and you will see the videos playlist. Use playback. Press 2. key to choose the video, press key to choose OK, to key to choose Back, to return to the playlist.
screen will show the confirmation message, use press key to choose OK, to delete file. Press return to the pause screen. Press to choose Yes or No, then key to choose Back, to key to choose Resume to playback. Press key to choose Back, to return to the playlist.
v. Menu function In general mode, press the 1. 2. 3. key to choose Menu , to enter the menu screen. Time Setup: Set up the current time In the menu screen: Select Time Setup. Use key to set up the date and time then press key to choose OK. After setup has been completed it will automatically return to the previous screen. Time Stamp: to set up the recording date & time on video In the menu screen, select Time stamp, then select On or Off.
vi. Memory card (Micro SD) PC connection instruction 1. With card reader Remove the memory card after turning off the device. Insert the memory card in a PC card reader. Your PC will detect a removable device. Open Windows Explorer to browse the files on the V10 memory card. 2. Memory card content operational, please refer to the next section, ADR player software operational. vii.
3. Software interface description A. Image display area: Displays the current playback image. B. G-Sensor display: Show G-sensor information of current video. C. Playback progress bar: Shows the progress of video playback, you can drag the mouse to the video position where you want to see. D. Video section list: Displays the current Micro SD card list of all the videos section. E. Video Groups List: Micro SD card shows the current group information list of all the videos. F.
4. Operational guideline: Buttons instructions A. Open disk: Open the video in which SD card drive B. Snapshot button: Save the current screen captured into a JPG image file. During playback or pause playback of the video, you can press this button to save as a JPG image file, file name will be saved to screen name at the time. C. Save button: The recorded video image will be transferred and save as AVI video. a.
b. If you want to save more than one group of films shown in the video group list, check the groups you want to save (see below), then click save button, these groups were transferred directly saved as AVI File. If the video a long time, transfer process may take some time, please be patient and you may press stop button to cancel during transfer processing. AVI files transferred out of maximum of each file size 2GB, if more than 2GB will be automatically saved as another AVI file. D.
Tool button: For system setup (as picture below) E. a. Format Micro SD card Will format the Micro SD card reader into the Abee V10 proprietary file format, and then of ADR Player software will be copied in to the memory card so you can use any computer to watch the video. ※ Format Card all data will be removed after Micro SD card formatted including password. b.
※ If the firmware BIN file is correct and upload into Micro SD card, it will pop up a message of "firmware upload complete!!” Please follow Firmware update instruction which describe in Abee Firmware specification to update firmware if there is new Abee firmware version released. d. Password settings User can set a password to protection Micro SD card content, if the use need to set a new password, user must enter the old password before setting a new password.
J. K. Play back volume: adjust play back volume. Unlock button: to unlock the protected video for the video list displayed in the group that been protected, press this button will pop up a whether determine to unlock the video message, press “yes” then can unlock the group videos. ※ It cannot lock again after unlocked, please make sure you have saved the copy file then do unlock function.
L. Repair button: can repair the damage video For the result of abnormal pull cards, power outages and other factors led to the end of the video destruction without the normal power off process (the group list of the damage file will show the red background: ), press this button, it will display all of damaged group list (as blow photograph), user can check the video section you want or choose to repair all damage repair to a revision of all the videos.
Specifications Specifications Display 2.
V10 Car Recorder Manual 快譯通股份有限公司 INSTANT TECHNOLOGY CO., LTD. 地址: 114 台北市內湖區瑞光路 316 巷 3 號 1 樓 Add: 1F., No.3, Lane 316, Rueiguang Rd., Neihu District, Taipei 114, Taiwan, R.O.C. 台北: (02)8752-5008 台中: (04)2472-6552 高雄: (07)536-5989 網址: http://www.instant.com.
