User's Guide

Abeeway Tracker Reference Guide FW 2.1 V1.1
Page 20 of 23 10
th
November 2020
Restricted distribution
POD 0x01 Position on demand
Set Mode 0x02 Change the tracker operational mode
Request configuration 0x03 Request the actual configuration of the tracker
Start SOS mode 0x04 Turn on SOS mode
Stop SOS mode 0x05 Turn off SOS mode
Proximity command 0x07 Control and monitor proximity feature
(3)
Set Param 0x0B Modify parameter(s)
Debug command 0xFF
Reset the tracker
Plays a melody
Trigger a heartbeat message
Entering in BLE bootloader
8 APPLICATION NOTES REFERENCES
Name Version Description
1 AN-001_ble-update V1.3 It describes how to update the BLE firmware
2 AN-002_LoRa_Transmission_strategy V1.2 It is provided to:
• Remind the basics of the LoRa network
• Remind the tracker configuration parameters.
• Provide the network capability of each supported
region
Suggest the best setting for each region based on the
application needs.
3 AN-003_ScanCollection v1.0 It describes the functioning of the scan collection
feature
4 AN-005_device_orientation v1.0 It describes how to calculate the device orientation
5 AN-006_Position_BLE_filtering TBD It describes how works the filtering of BLE beacons for
position payloads
6 AN-007_proximity feature TBD It describes the proximity detection behavior and
configuration
9 HANDLING AND SAFETY
If there is any reason to suspect that the safety of a device has been compromised such as broken casing, battery
leakage, anormal temperature, the device must be withdrawn from use and for ATEX product removed from any
ex-hazardous area immediately.
9.1 Micro Tracker and Smart Badge
Those products use an internal and built-in rechargeable lithium-polymer battery that should last the lifetime of